Wooden barrels
Wooden barrels
3D
Published 2020-09-07T14:29:29+00:00
Wooden barrels created with the goal of getting a more realistic look and scaling then my other barrel file. Created for 1:76 scale models (close to HO scale railway) but should be fine to rescale.
Contains:
-Plain wooden barrel
-Barrel with removed top (so can be filled whatever is needed)
-Barrel with removed bottom (to save resin)
-Barrel lid
Provided with/without supports and as a full elegoo mars print bed. Detail is on the underside however often lost when printing on the bed.
Barrels are hollow however do not have a drainage hole. A bottomless file is provided which will allow for trapped resin to escape and a lid file to close the barrel off if the bottom needs to be shown. Could also print the barrel in two halves and stick them together however have not tried this.
| Date published | 07/09/2020 |
| Benoetigte Zeit | 55 - 65 Minuten |
| Menge an Filament | 0.8mg |
| Dimensionen | 8.54mm x 8.54mm x 12.00mm |