jabian's Print of 32 Day Clock Easy Build
Community Print 3D Print of 32 Day Clock Easy Build
Published 2022-03-29T20:01:59+00:00
0
0
Printed on: Snapmaker 2.0
Material: ABS
Description
15 days model
Gears: Smartfil ABS, silver.
Other: Snapmaker PLA black, GST3D PLA yellow and white.
Weight shell = 3.1 Kg
Mods:
- Bigger Pulley (55 cm) with flatter channel.
- Larger Nylon cord (1 mm diameter).
- Weight Shell redesigned for larger pulley.
- Nylon line end-fixings designed for easy assembly and disassembly (no knots to untie).
- Precise watch angle adjustment system to optimize anchor and escapement play.
- Indicator and scale to monitor clock angle.
- Gear and spacer that need to be integral with the axle, fixed with a screw. No need to try different sizes until you get a precise fit. Removable and adjustable as many times as you want.
-The weight is achieved mainly with 10x10X150 lead bars. BBs to adjust.
- Most screws replaced with M3/M4 bolts and heat-set threaded inserts.
Building and watching this clock work is a unique experience. Do not miss it!