BustedChain's Print of Astrolabicon Pro // Ripple
Community Print 3D Print of Astrolabicon Pro // Ripple
Published 2021-05-10T16:59:16+00:00
0
2
Printed on: Creality CR-10S Pro
Material: PETG
Description
Printed on a heavily modified CR-10S Pro Direct Drive printer, 0.6mm nozzle, 0.72mm line width, 0.16 layer height. Zyltech PETG at 231 / 232 degrees F on a 70 degrees heated bed.
3 hours for 1 half of the sphericon.
Haven't found any beads locally. Waiting for the slow boat from China.
Only need 3 magnets in one side for it to work. Might be able to do 4 magnets in a row in positions 1,2,3,4 leaving the next 2 positions empty in the first half. The other half could have the 3 magnets in alternating positions.
The 9 magnets I show in my picture work very well. Just thinking you could maybe get it down to 7 magnets total and still have it work.