wasabi317's Print of Ferrofluid Container
Community Print 3D Print of Ferrofluid Container
Published 2021-05-12T15:57:59+00:00
3
0
Printed on: Artillery Sidewinder X1
Material: PLA
Description
This was the medium tolerance print file! Kept at the original 100%, but slicer settings were per suggested. I think that increasing the infill to 10% might help with some of the gaps in the walls. My infill pattern was "wiggle" so maybe something like "rectilinear" or "triangles." Took about 8H:04M:47S.