Cut Stone Town Terrain - 3D Printable STL Files

Created by AngryGriffin

* Scaled to suit 28mm wargames
* No supports required!
* Magnet-ready designs

The Stone Town Terrain Pack comes scaled to suit common 28mm systems such as Warhammer 40K, Age of Sigmar and the like. The walls, buildings and door feature 5mm x 1mm magnet holes on the blank or hidden faces to allow easy setup and flexible arrangement of walls and building levels.


All files have been test printed and they are designed for quick and easy printing. All pics shown on the Kickstarter page are actual physical prints, no renders have been used.


Wall Pack:

The walls are designed to be flexible and easy to set up with two different straight lengths (~152mm and ~76mm long), a corner piece (~76mm a side), an end cap (19mm) and a doorway/gateway. The walls are all 30mm high and 10mm thick. This pack includes five STL files.

Town Pack:

This pack includes:


2x intact buildings

1x ruined building

1x roof with no walls

2x roof with walls

1x intact floor

1x floor with damage

1x floor with trapdoor hole, plus trapdoor (2 files)

1x door

1x doorway step

1x stair set

1x gangway with additional fastener strips (2 files)

1x wardrobe

1x table

1x well with posts and roof (3 files)


In total there are 20 files included on top of the five from the wall pack - making the total for the town pack 25 STL files (plus a couple that have been mirrored for convenience, and some with higher floor tab cutouts if your printer needs some extra height for the bridges). Both of the buildings are approx. 117x153mm in footprint and are 58.35mm high.