Whispers of Eternity
Created by Antigone Miniatures
3D Printable STL buildings, cemetery and terrain for your tabletop, Role playing games, war-games or RPG in a scale of 28mm or 32mm
Whispers of Eternity
Created by Antigone Miniatures- Pledges (8)
- Add-ons (0)
Pledges
96 backers
USD 18.00
Ruins - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Hangman's Tree - Whispers of Eternity
Coming from the Whispers of Eternity campaign
Late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Mausoleum - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing (Bottom and roof are hollow)
Modular Tomb Interior : skeleton or staircase (both included)
Modular Tomb lid : recumbent or undead lid (both included)
Designed for 28 or 32mm scales
Suitable for large SLA(resin) printers : bedsize required : 120mm x 145mm
Tombstones Set - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Modular Cemetery Walls and Gate
coming from the "Whispers of Eternity" campaign
late pledge here
modular ; held together by print-in place clips/holes
support-free for FDM printing
Pre-supported for Resin printing (Gate is hollow)
Designed for 28 or 32mm scales
1 x detailed Gate
4 x type straight walls
2 x curved walls
1 x perpendicular wall
2 x doors (wooden door + Iron Grille Door)
Pavilion - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for RESIN printing
Modular Tomb Interior : skeleton or staircase (both included)
Modular Tomb lid : recumbent or undead lid (both included)
The pavilion is modular, allowing the tomb to be replaced with The Monument (link link here) or the Angel of Grief (link here)
Designed for 28 or 32mm scales
Small Mausoleum - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Whispers of Eternity ; Monument
This funeral monument was part of the Whispers of Eternity Kickstarter campaign
Late pledge available here
This monument can be a stand alone piece or can fit into The Pavilion
support-free for FDM printing
Designed for 28 or 32mm scales
You receive the STL files to print all the buildings and accessories of the campaign as well as all stretch goals unlocked during the campaign for a PERSONAL use.
19 backers
USD 30.00
Ruins - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Hangman's Tree - Whispers of Eternity
Coming from the Whispers of Eternity campaign
Late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Mausoleum - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing (Bottom and roof are hollow)
Modular Tomb Interior : skeleton or staircase (both included)
Modular Tomb lid : recumbent or undead lid (both included)
Designed for 28 or 32mm scales
Suitable for large SLA(resin) printers : bedsize required : 120mm x 145mm
Tombstones Set - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Modular Cemetery Walls and Gate
coming from the "Whispers of Eternity" campaign
late pledge here
modular ; held together by print-in place clips/holes
support-free for FDM printing
Pre-supported for Resin printing (Gate is hollow)
Designed for 28 or 32mm scales
1 x detailed Gate
4 x type straight walls
2 x curved walls
1 x perpendicular wall
2 x doors (wooden door + Iron Grille Door)
Pavilion - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for RESIN printing
Modular Tomb Interior : skeleton or staircase (both included)
Modular Tomb lid : recumbent or undead lid (both included)
The pavilion is modular, allowing the tomb to be replaced with The Monument (link link here) or the Angel of Grief (link here)
Designed for 28 or 32mm scales
Small Mausoleum - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Whispers of Eternity ; Monument
This funeral monument was part of the Whispers of Eternity Kickstarter campaign
Late pledge available here
This monument can be a stand alone piece or can fit into The Pavilion
support-free for FDM printing
Designed for 28 or 32mm scales
Fantasy Wood House
Antigone Miniatures Fantasy Wood House is a detailed model for your game table. It can be used within numerous roleplaying adventures, as scenery in tabletop games or as a diorama accessory. Mosses and mushrooms adorn the exterior.
- Fully playable interior.
- Designed to play : easy miniatures placement,working door, interlocking of the different parts with alignment pegs,
- Printable in PLA or resin
- The pieces are designed to be printed on a 20x20cm bed ;
furniture to complete the house can be found here
Fantasy Wood House Accessories
This set contain the essential interior accessories of an alchemist den. They fit perfectly in the Fantasy Wood House model. Accessories are designed and tested for STL 3D printing. Hassle-free sharper prints could be obtained with a resin printer.
you can buy the house here
Fantasy Forest pack 1
The Fantasy Forest is the first part of the Dark Oak Forest collection. It can be used within numerous roleplaying adventures, as scenery in tabletop games or as a diorama accessory. Birds, mosses and mushrooms adorn the exterior.
It admirably complements the Fantasy Wood House and its accessories.
You receive the STL files to print BOTH the Whispers of Eternity AND the Wood House campaigns as well as stretch goals unlocked during the campaign for your PERSONAL use
3 backers
USD 45.00
Ruins - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Mausoleum - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing (Bottom and roof are hollow)
Modular Tomb Interior : skeleton or staircase (both included)
Modular Tomb lid : recumbent or undead lid (both included)
Designed for 28 or 32mm scales
Suitable for large SLA(resin) printers : bedsize required : 120mm x 145mm
Tombstones Set - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Modular Cemetery Walls and Gate
coming from the "Whispers of Eternity" campaign
late pledge here
modular ; held together by print-in place clips/holes
support-free for FDM printing
Pre-supported for Resin printing (Gate is hollow)
Designed for 28 or 32mm scales
1 x detailed Gate
4 x type straight walls
2 x curved walls
1 x perpendicular wall
2 x doors (wooden door + Iron Grille Door)
Pavilion - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for RESIN printing
Modular Tomb Interior : skeleton or staircase (both included)
Modular Tomb lid : recumbent or undead lid (both included)
The pavilion is modular, allowing the tomb to be replaced with The Monument (link link here) or the Angel of Grief (link here)
Designed for 28 or 32mm scales
Small Mausoleum - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Whispers of Eternity ; Monument
This funeral monument was part of the Whispers of Eternity Kickstarter campaign
Late pledge available here
This monument can be a stand alone piece or can fit into The Pavilion
support-free for FDM printing
Designed for 28 or 32mm scales
The Crossway - Lookout Tree
Coming from the "Elvish Odyssey" set, this building feature intricate elven details wich will certainly enhence your gaming table.
It can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included)
It can be decorated with optional lanterns (included)
The building is support-free for STL printing
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Hazelnut House
Coming from the "Elvish Odyssey" set, this building is the perfect complement to the Giant Hazelnut Tree
- The building is support-free for STL printing
- Pegs and holes for alignment
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Elven Fournitures
Coming from the "Elvish Odyssey" campaign, this set contains the basic furniture to bring your elven interior to life.
-elven chest
-elven barrel
-wood table
-chair
The files can be printed with both an fdm or a resin printer. A presupported version of the chair is included for filament printer. The other items print without supports.
Wood Elf House C
Coming from the "Elvish Odyssey" set, this building feature intricate elven details wich will certainly enhence your gaming table.
It can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included)
The building is support-free for STL printing
Lots of pre-textured elements
Can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included with the others buildings)
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Wood Elf House B
Coming from the "Elvish Odyssey" set, this building feature intricate elven details wich will certainly enhence your gaming table.
It can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included)
The building is support-free for STL printing
Lots of pre-textured elements
Can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included with the others buildings)
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Fantasy Forest pack 2
Coming from the "Elvish Odyssey" campaign, this set of trees can be decorated using the included lanterns. The stump covered with flowers could be use to add a nice touch of color to your gaming table.
At 28mm scale :
Tree A : height 284mm
Tree B : height 200mm
Stump : height 48mm
Frog Pond with Elven Gazebo
The Frog Pond feature lot of details, from several varieties aquatic plants, to an Elven gazebo or a fantasy toad.
The gazebo and the toad are printed separately and can therefore be used for other purposes.
At 28mm scale, the pond is 19,8x19,3mm ; the gazebo is 8,5x8,4mm wide and 108mm height
Elven Shrine
Coming from the "Elvish Odyssey" campaign, the Elven Shrine will definitely elevate your gaming table.
The hollow trunk allows the option to add LED lights to illuminate the runes engraved in the bark.
Lots of details (crows ; water fountains ; mosaic floor ;runic trunk ; carved stones ; plants surronding the tree)
At 28mm scale, the base is 19x19cm and the shrine height is 20cm.
Option: tree with/without runes
Elven Fountain
Coming from the "Elvish Odyssey" campaing, this fountain make a great addition to any elven or classic game table.
At 28mm scale, the fountain is 10cm wide.
Wood Elf House A
Coming from the "Elvish Odyssey" set, this building feature intricate elven details wich will certainly enhence your gaming table.
It can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included)
The building is support-free for STL printing
Lots of pre-textured elements
Engrave floor
Can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included with the others buildings)
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Giant Elven Hazelnut Tree
Inspired by nature, this highly-detailed building capture the intricate details of elfish architecture, with each element carefully crafted to transport you to a world of wonder and enchantment. It can be decorated with optional lanterns (included)
The building is support-free for STL printing
Lots of pre-textured elements
Gameplay elements to enhance your narrative (mushroom ladder ; climbing rope ; crystal lanterns)
Can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included with the others buildings)
Printed in 28mm scale, the tree is 55cm tall.
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Hangman's Tree - Whispers of Eternity
Coming from the Whispers of Eternity campaign
Late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
You receive the STL files to print BOTH the Whispers of Eternity AND Elvish Odyssey campaigns as well as stretch goals unlocked during the campaign for your PERSONAL use
10 backers
USD 55.00
Ruins - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Hangman's Tree - Whispers of Eternity
Coming from the Whispers of Eternity campaign
Late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Mausoleum - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing (Bottom and roof are hollow)
Modular Tomb Interior : skeleton or staircase (both included)
Modular Tomb lid : recumbent or undead lid (both included)
Designed for 28 or 32mm scales
Suitable for large SLA(resin) printers : bedsize required : 120mm x 145mm
Tombstones Set - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Modular Cemetery Walls and Gate
coming from the "Whispers of Eternity" campaign
late pledge here
modular ; held together by print-in place clips/holes
support-free for FDM printing
Pre-supported for Resin printing (Gate is hollow)
Designed for 28 or 32mm scales
1 x detailed Gate
4 x type straight walls
2 x curved walls
1 x perpendicular wall
2 x doors (wooden door + Iron Grille Door)
Pavilion - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for RESIN printing
Modular Tomb Interior : skeleton or staircase (both included)
Modular Tomb lid : recumbent or undead lid (both included)
The pavilion is modular, allowing the tomb to be replaced with The Monument (link link here) or the Angel of Grief (link here)
Designed for 28 or 32mm scales
Small Mausoleum - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Whispers of Eternity ; Monument
This funeral monument was part of the Whispers of Eternity Kickstarter campaign
Late pledge available here
This monument can be a stand alone piece or can fit into The Pavilion
support-free for FDM printing
Designed for 28 or 32mm scales
The Crossway - Lookout Tree
Coming from the "Elvish Odyssey" set, this building feature intricate elven details wich will certainly enhence your gaming table.
It can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included)
It can be decorated with optional lanterns (included)
The building is support-free for STL printing
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Hazelnut House
Coming from the "Elvish Odyssey" set, this building is the perfect complement to the Giant Hazelnut Tree
- The building is support-free for STL printing
- Pegs and holes for alignment
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Elven Fournitures
Coming from the "Elvish Odyssey" campaign, this set contains the basic furniture to bring your elven interior to life.
-elven chest
-elven barrel
-wood table
-chair
The files can be printed with both an fdm or a resin printer. A presupported version of the chair is included for filament printer. The other items print without supports.
Wood Elf House C
Coming from the "Elvish Odyssey" set, this building feature intricate elven details wich will certainly enhence your gaming table.
It can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included)
The building is support-free for STL printing
Lots of pre-textured elements
Can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included with the others buildings)
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Wood Elf House B
Coming from the "Elvish Odyssey" set, this building feature intricate elven details wich will certainly enhence your gaming table.
It can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included)
The building is support-free for STL printing
Lots of pre-textured elements
Can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included with the others buildings)
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Fantasy Forest pack 2
Coming from the "Elvish Odyssey" campaign, this set of trees can be decorated using the included lanterns. The stump covered with flowers could be use to add a nice touch of color to your gaming table.
At 28mm scale :
Tree A : height 284mm
Tree B : height 200mm
Stump : height 48mm
Frog Pond with Elven Gazebo
The Frog Pond feature lot of details, from several varieties aquatic plants, to an Elven gazebo or a fantasy toad.
The gazebo and the toad are printed separately and can therefore be used for other purposes.
At 28mm scale, the pond is 19,8x19,3mm ; the gazebo is 8,5x8,4mm wide and 108mm height
Elven Shrine
Coming from the "Elvish Odyssey" campaign, the Elven Shrine will definitely elevate your gaming table.
The hollow trunk allows the option to add LED lights to illuminate the runes engraved in the bark.
Lots of details (crows ; water fountains ; mosaic floor ;runic trunk ; carved stones ; plants surronding the tree)
At 28mm scale, the base is 19x19cm and the shrine height is 20cm.
Option: tree with/without runes
Elven Fountain
Coming from the "Elvish Odyssey" campaing, this fountain make a great addition to any elven or classic game table.
At 28mm scale, the fountain is 10cm wide.
Wood Elf House A
Coming from the "Elvish Odyssey" set, this building feature intricate elven details wich will certainly enhence your gaming table.
It can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included)
The building is support-free for STL printing
Lots of pre-textured elements
Engrave floor
Can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included with the others buildings)
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Giant Elven Hazelnut Tree
Inspired by nature, this highly-detailed building capture the intricate details of elfish architecture, with each element carefully crafted to transport you to a world of wonder and enchantment. It can be decorated with optional lanterns (included)
The building is support-free for STL printing
Lots of pre-textured elements
Gameplay elements to enhance your narrative (mushroom ladder ; climbing rope ; crystal lanterns)
Can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included with the others buildings)
Printed in 28mm scale, the tree is 55cm tall.
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Fantasy Forest pack 1
The Fantasy Forest is the first part of the Dark Oak Forest collection. It can be used within numerous roleplaying adventures, as scenery in tabletop games or as a diorama accessory. Birds, mosses and mushrooms adorn the exterior.
It admirably complements the Fantasy Wood House and its accessories.
Fantasy Wood House Accessories
This set contain the essential interior accessories of an alchemist den. They fit perfectly in the Fantasy Wood House model. Accessories are designed and tested for STL 3D printing. Hassle-free sharper prints could be obtained with a resin printer.
you can buy the house here
Fantasy Wood House
Antigone Miniatures Fantasy Wood House is a detailed model for your game table. It can be used within numerous roleplaying adventures, as scenery in tabletop games or as a diorama accessory. Mosses and mushrooms adorn the exterior.
- Fully playable interior.
- Designed to play : easy miniatures placement,working door, interlocking of the different parts with alignment pegs,
- Printable in PLA or resin
- The pieces are designed to be printed on a 20x20cm bed ;
furniture to complete the house can be found here
You receive the STL files to print ALL tree campaigns : the Whispers of Eternity, Elvish Odyssey AND the Wood House as well as stretch goals unlocked during the campaign for your PERSONAL use
33 backers
USD 40.00
Mausoleum - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing (Bottom and roof are hollow)
Modular Tomb Interior : skeleton or staircase (both included)
Modular Tomb lid : recumbent or undead lid (both included)
Designed for 28 or 32mm scales
Suitable for large SLA(resin) printers : bedsize required : 120mm x 145mm
Tombstones Set - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Modular Cemetery Walls and Gate
coming from the "Whispers of Eternity" campaign
late pledge here
modular ; held together by print-in place clips/holes
support-free for FDM printing
Pre-supported for Resin printing (Gate is hollow)
Designed for 28 or 32mm scales
1 x detailed Gate
4 x type straight walls
2 x curved walls
1 x perpendicular wall
2 x doors (wooden door + Iron Grille Door)
Pavilion - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for RESIN printing
Modular Tomb Interior : skeleton or staircase (both included)
Modular Tomb lid : recumbent or undead lid (both included)
The pavilion is modular, allowing the tomb to be replaced with The Monument (link link here) or the Angel of Grief (link here)
Designed for 28 or 32mm scales
Small Mausoleum - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Whispers of Eternity ; Monument
This funeral monument was part of the Whispers of Eternity Kickstarter campaign
Late pledge available here
This monument can be a stand alone piece or can fit into The Pavilion
support-free for FDM printing
Designed for 28 or 32mm scales
Ruins - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Hangman's Tree - Whispers of Eternity
Coming from the Whispers of Eternity campaign
Late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
LIFETIME license. You receive the STL files to print all the buildings and accessories of the campaign as well as all stretch goals unlocked during the campaign for a COMMERCIAL use. You may not sell the STL files, only the physical 3D printed buildings and accessories.
2 backers
USD 80.00
Ruins - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Hangman's Tree - Whispers of Eternity
Coming from the Whispers of Eternity campaign
Late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Mausoleum - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing (Bottom and roof are hollow)
Modular Tomb Interior : skeleton or staircase (both included)
Modular Tomb lid : recumbent or undead lid (both included)
Designed for 28 or 32mm scales
Suitable for large SLA(resin) printers : bedsize required : 120mm x 145mm
Tombstones Set - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Modular Cemetery Walls and Gate
coming from the "Whispers of Eternity" campaign
late pledge here
modular ; held together by print-in place clips/holes
support-free for FDM printing
Pre-supported for Resin printing (Gate is hollow)
Designed for 28 or 32mm scales
1 x detailed Gate
4 x type straight walls
2 x curved walls
1 x perpendicular wall
2 x doors (wooden door + Iron Grille Door)
Pavilion - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for RESIN printing
Modular Tomb Interior : skeleton or staircase (both included)
Modular Tomb lid : recumbent or undead lid (both included)
The pavilion is modular, allowing the tomb to be replaced with The Monument (link link here) or the Angel of Grief (link here)
Designed for 28 or 32mm scales
Small Mausoleum - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Whispers of Eternity ; Monument
This funeral monument was part of the Whispers of Eternity Kickstarter campaign
Late pledge available here
This monument can be a stand alone piece or can fit into The Pavilion
support-free for FDM printing
Designed for 28 or 32mm scales
Fantasy Wood House
Antigone Miniatures Fantasy Wood House is a detailed model for your game table. It can be used within numerous roleplaying adventures, as scenery in tabletop games or as a diorama accessory. Mosses and mushrooms adorn the exterior.
- Fully playable interior.
- Designed to play : easy miniatures placement,working door, interlocking of the different parts with alignment pegs,
- Printable in PLA or resin
- The pieces are designed to be printed on a 20x20cm bed ;
furniture to complete the house can be found here
Fantasy Wood House Accessories
This set contain the essential interior accessories of an alchemist den. They fit perfectly in the Fantasy Wood House model. Accessories are designed and tested for STL 3D printing. Hassle-free sharper prints could be obtained with a resin printer.
you can buy the house here
Fantasy Forest pack 1
The Fantasy Forest is the first part of the Dark Oak Forest collection. It can be used within numerous roleplaying adventures, as scenery in tabletop games or as a diorama accessory. Birds, mosses and mushrooms adorn the exterior.
It admirably complements the Fantasy Wood House and its accessories.
LIFETIME license. You receive the STL files to print all the buildings and accessories from BOTH the Whispers of Eternity AND the Wood House campaigns as well as all stretch goals unlocked during the campaign for a COMMERCIAL use. You may not sell the STL files, only the physical 3D printed buildings and accessories.
1 backer
USD 88.00
Ruins - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Hangman's Tree - Whispers of Eternity
Coming from the Whispers of Eternity campaign
Late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Mausoleum - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing (Bottom and roof are hollow)
Modular Tomb Interior : skeleton or staircase (both included)
Modular Tomb lid : recumbent or undead lid (both included)
Designed for 28 or 32mm scales
Suitable for large SLA(resin) printers : bedsize required : 120mm x 145mm
Tombstones Set - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Modular Cemetery Walls and Gate
coming from the "Whispers of Eternity" campaign
late pledge here
modular ; held together by print-in place clips/holes
support-free for FDM printing
Pre-supported for Resin printing (Gate is hollow)
Designed for 28 or 32mm scales
1 x detailed Gate
4 x type straight walls
2 x curved walls
1 x perpendicular wall
2 x doors (wooden door + Iron Grille Door)
Pavilion - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for RESIN printing
Modular Tomb Interior : skeleton or staircase (both included)
Modular Tomb lid : recumbent or undead lid (both included)
The pavilion is modular, allowing the tomb to be replaced with The Monument (link link here) or the Angel of Grief (link here)
Designed for 28 or 32mm scales
Small Mausoleum - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Whispers of Eternity ; Monument
This funeral monument was part of the Whispers of Eternity Kickstarter campaign
Late pledge available here
This monument can be a stand alone piece or can fit into The Pavilion
support-free for FDM printing
Designed for 28 or 32mm scales
The Crossway - Lookout Tree
Coming from the "Elvish Odyssey" set, this building feature intricate elven details wich will certainly enhence your gaming table.
It can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included)
It can be decorated with optional lanterns (included)
The building is support-free for STL printing
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Hazelnut House
Coming from the "Elvish Odyssey" set, this building is the perfect complement to the Giant Hazelnut Tree
- The building is support-free for STL printing
- Pegs and holes for alignment
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Elven Fournitures
Coming from the "Elvish Odyssey" campaign, this set contains the basic furniture to bring your elven interior to life.
-elven chest
-elven barrel
-wood table
-chair
The files can be printed with both an fdm or a resin printer. A presupported version of the chair is included for filament printer. The other items print without supports.
Wood Elf House C
Coming from the "Elvish Odyssey" set, this building feature intricate elven details wich will certainly enhence your gaming table.
It can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included)
The building is support-free for STL printing
Lots of pre-textured elements
Can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included with the others buildings)
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Wood Elf House B
Coming from the "Elvish Odyssey" set, this building feature intricate elven details wich will certainly enhence your gaming table.
It can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included)
The building is support-free for STL printing
Lots of pre-textured elements
Can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included with the others buildings)
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Fantasy Forest pack 2
Coming from the "Elvish Odyssey" campaign, this set of trees can be decorated using the included lanterns. The stump covered with flowers could be use to add a nice touch of color to your gaming table.
At 28mm scale :
Tree A : height 284mm
Tree B : height 200mm
Stump : height 48mm
Frog Pond with Elven Gazebo
The Frog Pond feature lot of details, from several varieties aquatic plants, to an Elven gazebo or a fantasy toad.
The gazebo and the toad are printed separately and can therefore be used for other purposes.
At 28mm scale, the pond is 19,8x19,3mm ; the gazebo is 8,5x8,4mm wide and 108mm height
Elven Shrine
Coming from the "Elvish Odyssey" campaign, the Elven Shrine will definitely elevate your gaming table.
The hollow trunk allows the option to add LED lights to illuminate the runes engraved in the bark.
Lots of details (crows ; water fountains ; mosaic floor ;runic trunk ; carved stones ; plants surronding the tree)
At 28mm scale, the base is 19x19cm and the shrine height is 20cm.
Option: tree with/without runes
Elven Fountain
Coming from the "Elvish Odyssey" campaing, this fountain make a great addition to any elven or classic game table.
At 28mm scale, the fountain is 10cm wide.
Wood Elf House A
Coming from the "Elvish Odyssey" set, this building feature intricate elven details wich will certainly enhence your gaming table.
It can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included)
The building is support-free for STL printing
Lots of pre-textured elements
Engrave floor
Can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included with the others buildings)
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Giant Elven Hazelnut Tree
Inspired by nature, this highly-detailed building capture the intricate details of elfish architecture, with each element carefully crafted to transport you to a world of wonder and enchantment. It can be decorated with optional lanterns (included)
The building is support-free for STL printing
Lots of pre-textured elements
Gameplay elements to enhance your narrative (mushroom ladder ; climbing rope ; crystal lanterns)
Can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included with the others buildings)
Printed in 28mm scale, the tree is 55cm tall.
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
LIFETIME license. You receive the STL files to print all the buildings and accessories from BOTH the Whispers of Eternity AND Elvish Odyssey campaigns as well as all stretch goals unlocked during the campaign for a COMMERCIAL use. You may not sell the STL files, only the physical 3D printed buildings and accessories.
10 backers
USD 130.00
Giant Elven Hazelnut Tree
Inspired by nature, this highly-detailed building capture the intricate details of elfish architecture, with each element carefully crafted to transport you to a world of wonder and enchantment. It can be decorated with optional lanterns (included)
The building is support-free for STL printing
Lots of pre-textured elements
Gameplay elements to enhance your narrative (mushroom ladder ; climbing rope ; crystal lanterns)
Can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included with the others buildings)
Printed in 28mm scale, the tree is 55cm tall.
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Fantasy Forest pack 1
The Fantasy Forest is the first part of the Dark Oak Forest collection. It can be used within numerous roleplaying adventures, as scenery in tabletop games or as a diorama accessory. Birds, mosses and mushrooms adorn the exterior.
It admirably complements the Fantasy Wood House and its accessories.
Fantasy Wood House Accessories
This set contain the essential interior accessories of an alchemist den. They fit perfectly in the Fantasy Wood House model. Accessories are designed and tested for STL 3D printing. Hassle-free sharper prints could be obtained with a resin printer.
you can buy the house here
Fantasy Wood House
Antigone Miniatures Fantasy Wood House is a detailed model for your game table. It can be used within numerous roleplaying adventures, as scenery in tabletop games or as a diorama accessory. Mosses and mushrooms adorn the exterior.
- Fully playable interior.
- Designed to play : easy miniatures placement,working door, interlocking of the different parts with alignment pegs,
- Printable in PLA or resin
- The pieces are designed to be printed on a 20x20cm bed ;
furniture to complete the house can be found here
Ruins - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Hangman's Tree - Whispers of Eternity
Coming from the Whispers of Eternity campaign
Late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Mausoleum - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing (Bottom and roof are hollow)
Modular Tomb Interior : skeleton or staircase (both included)
Modular Tomb lid : recumbent or undead lid (both included)
Designed for 28 or 32mm scales
Suitable for large SLA(resin) printers : bedsize required : 120mm x 145mm
Tombstones Set - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Modular Cemetery Walls and Gate
coming from the "Whispers of Eternity" campaign
late pledge here
modular ; held together by print-in place clips/holes
support-free for FDM printing
Pre-supported for Resin printing (Gate is hollow)
Designed for 28 or 32mm scales
1 x detailed Gate
4 x type straight walls
2 x curved walls
1 x perpendicular wall
2 x doors (wooden door + Iron Grille Door)
Pavilion - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for RESIN printing
Modular Tomb Interior : skeleton or staircase (both included)
Modular Tomb lid : recumbent or undead lid (both included)
The pavilion is modular, allowing the tomb to be replaced with The Monument (link link here) or the Angel of Grief (link here)
Designed for 28 or 32mm scales
Small Mausoleum - Whispers of Eternity
coming from the "Whispers of Eternity" campaign
late pledge here
support-free for FDM printing
Pre-supported for Resin printing
Designed for 28 or 32mm scales
Whispers of Eternity ; Monument
This funeral monument was part of the Whispers of Eternity Kickstarter campaign
Late pledge available here
This monument can be a stand alone piece or can fit into The Pavilion
support-free for FDM printing
Designed for 28 or 32mm scales
The Crossway - Lookout Tree
Coming from the "Elvish Odyssey" set, this building feature intricate elven details wich will certainly enhence your gaming table.
It can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included)
It can be decorated with optional lanterns (included)
The building is support-free for STL printing
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Hazelnut House
Coming from the "Elvish Odyssey" set, this building is the perfect complement to the Giant Hazelnut Tree
- The building is support-free for STL printing
- Pegs and holes for alignment
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Elven Fournitures
Coming from the "Elvish Odyssey" campaign, this set contains the basic furniture to bring your elven interior to life.
-elven chest
-elven barrel
-wood table
-chair
The files can be printed with both an fdm or a resin printer. A presupported version of the chair is included for filament printer. The other items print without supports.
Wood Elf House C
Coming from the "Elvish Odyssey" set, this building feature intricate elven details wich will certainly enhence your gaming table.
It can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included)
The building is support-free for STL printing
Lots of pre-textured elements
Can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included with the others buildings)
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Wood Elf House B
Coming from the "Elvish Odyssey" set, this building feature intricate elven details wich will certainly enhence your gaming table.
It can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included)
The building is support-free for STL printing
Lots of pre-textured elements
Can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included with the others buildings)
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
Fantasy Forest pack 2
Coming from the "Elvish Odyssey" campaign, this set of trees can be decorated using the included lanterns. The stump covered with flowers could be use to add a nice touch of color to your gaming table.
At 28mm scale :
Tree A : height 284mm
Tree B : height 200mm
Stump : height 48mm
Frog Pond with Elven Gazebo
The Frog Pond feature lot of details, from several varieties aquatic plants, to an Elven gazebo or a fantasy toad.
The gazebo and the toad are printed separately and can therefore be used for other purposes.
At 28mm scale, the pond is 19,8x19,3mm ; the gazebo is 8,5x8,4mm wide and 108mm height
Elven Shrine
Coming from the "Elvish Odyssey" campaign, the Elven Shrine will definitely elevate your gaming table.
The hollow trunk allows the option to add LED lights to illuminate the runes engraved in the bark.
Lots of details (crows ; water fountains ; mosaic floor ;runic trunk ; carved stones ; plants surronding the tree)
At 28mm scale, the base is 19x19cm and the shrine height is 20cm.
Option: tree with/without runes
Elven Fountain
Coming from the "Elvish Odyssey" campaing, this fountain make a great addition to any elven or classic game table.
At 28mm scale, the fountain is 10cm wide.
Wood Elf House A
Coming from the "Elvish Odyssey" set, this building feature intricate elven details wich will certainly enhence your gaming table.
It can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included)
The building is support-free for STL printing
Lots of pre-textured elements
Engrave floor
Can be connected to other buildings in the "Elvish Odyssey" campaign by a "print-in-place" suspension bridge (included with the others buildings)
A standard build plate of 200 mm x 200 mm enables the printing of the house at a scale of 28mm without cutting the files.
LIFETIME license. You receive the STL files to print all the buildings and accessories from ALL tree campaigns : the Whispers of Eternity, Elvish Odyssey AND the Wood House as well as all stretch goals unlocked during the campaign for a COMMERCIAL use. You may not sell the STL files, only the physical 3D printed buildings and accessories.