3D printable cell phone tripod mount
3D printable cell phone tripod mount
3D
Published 2022-01-03T12:07:50+00:00
Do you want to fix your cell phone on your camera tripod? Do you have a 3d printer?
We designed this to mount cell phones of any size to camera tripods, even if you have a phone case and a pop socket attached. The best part is that it is almost 100% 3d printed! You just need a 1/4"-20 hex nut and, optionally, two short adhesive foam strips to protect the phone from scratching and increase the grip.
This should work on most different types of tripod plates (Oben, Ambico, Manfrotto, Arca Swiss, generic ones, etc) but you should definitely check the *stem.stl* file to verify this. It has a pocket to fit the 1/4"-20 nut and a slot for the alignment pin we see on some tripod quick-release plates.
Where to get what you need
Imperial size nuts kits - including 1/4"-20 hex nuts (Amazon, affiliate)
Self-adhesive foam strips (Amazon, affiliate)
---
Follow us / support
Did you like this design? Follow us on Instagram! We are @twothingies
If you really like what we are doing and want to support us, you could buy us a coffee or two!
About selling our designs
Please be aware that our designs are available for free for non-commercial purposes only.
If you'd like to sell prints of one of our designs, we would be happy to discuss that with you! Please send us a message if you are interested at twothingies@gmail.com
Nozzle size: 0.4 mm
Line width: 0.42 mm
Layer height: 0.2 mm
Print Speed: 60 mm/s
Perimeters: at least 3 (we used 5)
Infill: 5%
Supports: YES, only for *clamp_B*
The STL files are meant to be printed in the provided orientation (that is, the parts are laying on one side).
To get the right fit on the nut part, you could need to scale it up or down depending on the characteristics of your printer and the filament you are using. We provide a version already scaled up 105% which worked fine for us :)
| Date published | 03/01/2022 |