3d printable vice / vise / clamp (high upgradability)
3d printable vice / vise / clamp (high upgradability)
3D
Published 2020-10-21T12:10:26+00:00
Sturdy and simple 3d printable vice with reversible jaws and future upgrade parts coming! It prints in place - the supports are built into the model.
it needs some hardware to work:
• 1x M8x120 bolt - the main part of the vice :)
• 1x M8 nut - press it into the slot in the jaw
• 1x 28mm washer (2.8mm thick) - press it in the slot in front of the vice - this part protects the knob and lets it spin freely
you may want to add:
• 16x 28mm washer (2.8mm thick) - for weighting it (glue in the holes on the underside)
• 8x M5x(25-50) bolt (for future upgrades as well as clamping irregular objects over the jaws)
• 8x M5 nut - for the M5 bolts to screw into - press them into the slots in the jaws of the vice
• 6x M5x(+/-50) bolt - for mounting the vice to the table (match the length to the thickness of your table + nut size + 9mm vice thickness)
• 6x M5 nuts to secure the vice under the table
• 12x M5 washer (13mm max diameter) to protect the vice mounting holes as well as the underside of the table
the supports are built into the model and worked for me the way i uploaded them, but you may experiment with different orientations and some automatic supports. i advise to use high infill and at least 2mm wall (it has to withstand some forces)
| Date published | 21/10/2020 |
| ¿Cuándo tiempo lleva? | 480 - 481 minutos |
| Cantidad de filamento | 220g |
| Dimensiones | 135mm x 100mm x 42.3mm |
| Sin apoyo | YES |