AEAGOD03 - Uthra
$3.00 AEAGOD03 - Uthra
3D
Published 2021-05-21T09:11:00+00:00
The God of Hunger is among the most fearsome creatuers on Aach’yn. His feeding mouths can reach across miles, devouring entire caravans in minutes. There is little defense but run and look for higher ground. Mouth pincers routinely crush through barriers of arcane and physical with ease. Nothing restrains the old hungry one.
This model was sculpted by Aether Studios’ Jacob Armour for our Kickstarters, we just weren’t sure which one at the time! Jacob is the originator of the Gods of Aach’yn series and contributed greatly to the lore of the world through his designs.
Prints in two presupported sections, with a connection guide.
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 21/05/2021 |
| Precio | $3.00 |
| Sin apoyo | YES |