AECAPC03 - Curio Shoppe
$8.00 AECAPC03 - Curio Shoppe
3D
Published 2023-01-04T09:53:59+00:00
This set is included in our Welcome pack, for Tribers pledging $15 and up.
This shop of curiosities is filled with favorites from our past releases, props, treasures, and Objet d’art alike. This simple scatter set will be sure to keep your players occupied trying to figure out the origin of each item. All models print easily without supports.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 04/01/2023 |
| Precio | $8.00 |
| Sin apoyo | YES |
Nasos Maloudis crafted this lovely book and statue Miss Windy found them in a fairy ring and painted them :)