AECATA02 - The Lair of Lord Garthus
$14.00 AECATA02 - The Lair of Lord Garthus
3D
Published 2022-12-16T09:37:14+00:00
This set contains our first major expansion of the Catacombs line from Nasos Maloudis. His Bridge of the Damned is the centerpiece of this set, as well as his fantastic miniatures for Lord Garthus. In addition, Ben Gayer provided the Gloomsteed while Marc Weatherhogg provided the Gearworks door. All of our talent has been brought to bare on this set. We hope the results are fit for your table.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
MINIATURE RECOMMENDED PRINT SETTINGS
This set includes both unsupported and presupported miniatures using the Lychee Slicer. It also includes a Lychee save so you can modify the supported sections further.
| Date published | 16/12/2022 |
| Precio | $14.00 |
| Sin apoyo | YES |
Nasos Maloudis designed this beautiful set.