AECATA03 - The Haunted Library
$13.00 AECATA03 - The Haunted Library
3D
Published 2022-12-16T09:37:13+00:00
This set contains our second major expansion of the Catacombs line from Colin Christenson. His haunted library is the centerpiece of this set, as well as his fantastic scatter terrain. Nasos Maloudis sculpted the vampire miniature and much of the underground terrain. In addition, Marc Weatherhogg provideda number of secret doors. All of our talent has been brought to bare on this set. We hope the results are fit for your table.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 16/12/2022 |
| Precio | $13.00 |
| Sin apoyo | YES |