AECAVE0 - Rich Caverns
$1.00 AECAVE0 - Rich Caverns
3D
Published 2022-10-31T05:28:34+00:00
This set goes out to all our Tribers, $2 and up.
This set of tile terrain includes literally everything you could ever need to make a diverse and multi-level setup of cavern terrain. It was created by Károly Csúrgó and Will Walker as a gift to the community. Over 175 models of Dragonbite-compatible, 2x2 gridded cavern terrain. Virtually every model is equipped with LEDs in the floor. Over a dozen variations of ore including copper, gold, mithril, adamantine, iron, graphite, bauxite, dilithium, dysonium, tritanium, platinum, graphite and more.
Absolutely no supports are needed when printing the models in this set.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 31/10/2022 |
| Precio | $1.00 |
| Sin apoyo | YES |
Absolutely love these tiles. Here are the beginnings of my crystal cave tile set. This set comes with basically everything you need to make caves.