AEHDGE08 - Secret Passage
$5.00 AEHDGE08 - Secret Passage
3D
Published 2023-01-05T16:01:20+00:00
This set is included in our Welcome pack, for Tribers pledging $15 and up.
This gearworks model was designed by Marc Weatherhogg for our Hedge Maze series. This model is a blessed one, for we thought it was lost in a hard drive crash that took many others.
The Hedge Mazes series of terrain was created by Colin Christenson and Will Walker as one of the early Aether Sets to build off of the Peaceful Gardens/Fountains series. Peaceful Gardens was our 2nd published set in July of 2018, and Hedge Mazes followed only 4 months later in November.
From the beginning, Hedge Mazes was a very popular set and has received constant new development and request support. This latest set features the gearworks construction of Marc Weatherhogg. We hope this makes a welcome addition to the hedge maze setups.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 05/01/2023 |
| Precio | $5.00 |
| Sin apoyo | YES |