AEJUNK04 - Junk Planet 4
$5.00 AEJUNK04 - Junk Planet 4
3D
Published 2021-07-26T08:18:53+00:00
This set is included in our 12-month loyalty pack for tribers pledging $15 or more
This series, Junk Planet, was created by Colin Christenson as a compliment to our many other sci-fi sets, a place to visit on missions and a place to scrounge for parts between adventures.
Junk Planet 4 features more fantastic tile terrain from Will and Nasos, with a few special parts from Carl and Colin. Many thanks to the whole team for all the help on this one. We really had a blast putting this latest expansion together. Most of them we're requests from our Discord team and we thank them for all the ideas.
We love getting requests for new models and the new ideas from the fans we have. We hope you reading this will consider joining our patreon and helping contribute to the development of this set!
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 26/07/2021 |
| Precio | $5.00 |
| Sin apoyo | YES |