AEMIOA05 – The Mead-Horn of Og Kalaat
$2.00 AEMIOA05 – The Mead-Horn of Og Kalaat
3D
Published 2022-03-03T09:48:38+00:00
This set is included in our 3 month loyalty pack for Tribers pledging $15 or more.
The Mead Horn of Og Kalaat is a practical artifact for the adventuring warrior King.
Check out our Instagram page for upcoming items, customers photos and much more!
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 03/03/2022 |
| Precio | $2.00 |
| Sin apoyo | YES |