AEOOTS01 - Order of the Soilborn
$4.00 AEOOTS01 - Order of the Soilborn
3D
Published 2021-10-27T07:00:15+00:00
This set is included in our Welcome pack, for Tribers pledging $15 and up.
From Aether Studios comes our least series series: Order of the Soilborn. This is a passion project from the Aether's Director and he routinely begs, cajoles, and bribes the artists to make models for this rediculous project. We have much more planned, but like any crop it takes a while to harvest.
TERRAIN RECOMMENDED PRINT SETTINGS
All Models Print Without Supports
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 27/10/2021 |
| Precio | $4.00 |
| Sin apoyo | YES |