AEPWAR0 – New Recruit Trenches
AEPWAR0 – New Recruit Trenches
3D
Published 2023-06-28T17:37:19+00:00
This set is included in our Welcome pack, for Tribers pledging $15 and up.
TEN HUT! These new trenches are built for the rugged training required to make it in this persons army. Colin Christenson, Nasos Maloudis, Windy Wolfe and Will Walker all cooperated on this set, with Will and Windy taking charge for this third instalment. This set gives you everything you need to start your campaign! Straight trenches, Corner Trenches, Inside and out, hills and slopes, risers, edges! All you need to start your campaign, the fight for freedom is FREE!
Love the trenches? A $15 pledge on Tribes gets you the entire War Trenches series and over 1300 additional models!
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Larger Terrain pieces can suffer with lightning infill.
| Date published | 28/06/2023 |
| Sin apoyo | YES |