AEVILL0 – Small Stone Tower and Mimics
AEVILL0 – Small Stone Tower and Mimics
3D
Published 2024-01-16T17:26:36+00:00
This set, AEVILL0 - Small Stone Tower & Mimic, is the free release for our 8th Kickstarter, Mimic Village. This set features both a plain tower and mimic versions of the sections.
This set was sculpted by Károly Csúrgó as one of the first models for this campaign. Many thanks to Ian Huffman and Ken Russell for the printed, painted pictures of these models. They are true heroes of Aether Studios and proud to wear our Red Jerseys.
Additional models will be added to this over the course of the campaign.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 16/01/2024 |
| Sin apoyo | YES |