Airship - Geshtar Class Dreadnought
$60.00 Airship - Geshtar Class Dreadnought
3D
Published 2021-01-05T23:01:27+00:00
Summary
Size in MM (XYZ): 559 x 1130 x 548
Free Stairs Pack has been added to downloads.
Caution: This ship is massive. It requires time, materials and patience to print. The end result is phenomenal, but only print this if you are prepared for the journey and you have place to store it! It is over 100cm in length.
Included is 1 ship from Skies of Sordane - Arrodan Syndicate Core Bundle. Find lore and rules for Sordane and its unique world here: https://www.myminifactory.com/object/3d-print-airship-campaigns-pdf-116233
- - This ship is sculpted for 32/35mm scale.
- - 6 Playable Interior levels (4 lower levels, 1 half lower level and 1 top deck level)
- - Gridded and non gridded deck options
- - Modular weapon and propulsion options
- - Magnetized levels and modular side options
- - Printable from medium resin and fdm printers and larger - HIGHLY Recommended to print in FDM and with an Ender 3 or larger.
- - Cutaway version of the ship, only the lower part of each level of the hull for those that just want the floorplan to play on.
Modular Options
- - Sordalite Crystal
- - Boarding Hooks
- - Spell Cannons
- - Spell Jet Thrusters
- - Propellers
- - Spell Cannons
- - Caps (if you don't want anything there)
Sculpted by: Osaka Zai
Find a bug? Join discord and report it! https://discord.gg/cKYygGsEjk
Added Cutaway Version of the Ship
Version 1.2 - Level 5 updated for new back rest support
Medium Resin - Entire Ship was resized to correct dimensions, issue with original export was found and corrected, new version of Level 5 with back rest added to the files.
Medium FDM - New Level 5
Small FDM - New Level 5
Stands update to add the separate stand mount for the new back rest for old Geshtar prints.
Version 1.1 - February 9th 2021.
Fixed Medium FDM Level 1 - parts D1 & D2
Fixed Small FDM Level 3 - part D1
Fixed Walls - Level 4 - part A1
Added the Magnet Replacement Peg
Added v2 of the Misc files to fix a scale issue on the Dragon head 2 cannons.
| Date published | 05/01/2021 |
| Precio | $60.00 |
As a test printer I had the priviledge of starting earlier with printing, so I am halfway now (I guess). It is really a massive ship, and I love watching it grow. Printing is pretty straightforward, I used a 0.4 nozzle, 0.2 layer height and 10% infill, some supports were needed but not a lot. I have just started with the clean-up of the levels I have finished, and am looking forward to priming&painting and adding furnature and a crew. When it is done it will be a huge dungeon for my players!