Airships base
$12.50 Airships base
3D
Published 2022-01-21T13:57:22+00:00
From my campaign Ks: Tree Village
A base for large and small airships, with a small two-seat airship included .
The top platform is 20x25cm and the base roots are wide enough to keep even large airships in balance.
Printed with Ender3
My settings :
Cura slicer
- Nozzle 0,4mm
- Pla 1,75mm
- Layer 0,2mm
- 5% infill
- Walls 1mm
- Support overhang angle from 80° to 86° (depend by the model)
- Support Z distance 0,3
To reduce the supports to the maximum I printed everything with an overhang between 80° - 86 °,
even if the supports are generally few and sometimes absent, you must leave the "generate supports" option in your slicer always active to allow those small parts need to be supported to print well.
I found the "support Z distance " setting in the supports section very important, because it allows us to distance the top of the support from the model a bit (my value 0.3mm)
With a print bed of 20x20x20cm each piece will fit well
Fabio
| Date published | 21/01/2022 |
| Precio | $12.50 |
Working my way through it. Love the design, easy to print and really helpful that the amount of items to print from a part is in the title. Would have like an overal picture with numbers and the same numbers engraved in the parts to make assembling easier. Printing on a Bambu Lab P1S with Bambu marble PLA.