AKK ultimate vtx/dvr 20x20 mount
AKK ultimate vtx/dvr 20x20 mount
3D
Published 2022-09-16T09:09:39+00:00
Thise is a 20x20 mount designed to fit the AKK dvr/vtx available on amazon. It is to be printed in tpu and is designed with a flexible flap that locks into place to prevent the sd card from premature ejection. The AKK board is naked, this mount is made to dampen impact and shield from grass juice splatter while providing open air for heat dissipation when running vtx at a full watt. This mount will fit most 20x20 mounts it is not necessarilly specific to this frame.
If you are not already using .5 nozzel I strongly recommend you do. You will print faster and make sexier tpu parts if you do. i print first layer bed temp 70>65bed temp, first layer 200 nozzel> 195 nozzel temp, 40ish mm print speed first layer at 80%, fan 80%
The file is programmed in inches. If it appears tiny, to display it correctly multiply the scale by 25.4 this just converts inches/millimeters. Some slicers I have to do this. Its a machinist trick.
| Date published | 16/09/2022 |
| ¿Cuándo tiempo lleva? | 50 - minutos |
| Cantidad de filamento | 10 |
