Area 51 Storage Facility
$15.00 Area 51 Storage Facility
3D
Published 2023-08-21T09:03:16+00:00
Why pay for this single file when you have over one thousand more for a lot less? That’s right. STLFLIX is a multi-theme ever-growing library of STL files. Your One-Stop-Shop for Premium 3D-Printing models. Get started with the Ultimate STL platform!
Area 51 Storage Facility
This STL file is recommended for FDM Printers!
3D Printing Time: 02 Days 07 Hours 25 Minutes
Approximately Height : 17 cm
It’s time for you to know the truth behind the Groom Lake facility. For that, we’ll show you the inside of the most secretive place on the planet: Area 51. Here we can see every detail highlighted by the layering of this amazing print. Trust us, you’ll need no supports anywhere – not even on the portal. Perfect for storing your SD cards, pendrives and the ultimate alien secret.
Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers)
Recommended Initial Layer Height: 0.16 mm
Recommended Layer Height: 0.16 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
COPYRIGHT & SELLING RIGHTS
This STL file is copyrighted by STLFLIX©, the Ultimate STL Subscription. This means you can print it for yourself, but you DO NOT have the right to sell it.
To acquire copyright & selling rights, you must subscribe to our Commercial License. By doing so, you will also get immediate access to over 500 STL files, unlimited downloads, and marketing content for every single file.
Go commercial and skyrocket your own store with STLFLIX!
USEFUL LINKS
Get to know us a little better!
Website | Instagram | TikTok | Twitter
What are you waiting for? Join thousands of other makers from all around the world.
HAPPY PRINTING!
| Date published | 21/08/2023 |
| Precio | $15.00 |