This is meant to help those with arthritis easily use their fisihing reels.  Products on the market currently cost around $75 and up (market example here) while this cost $0.74 in plastic and the 20cm of velcro required cost about $1.00 (click here for velcro) for an overall price of approximately $1.74. The model was made using OpenSCAD and the slicing software used was Cura.

Main print settings:

• Material: PLA
• Layer Height: 0.2 mm
• Bottom/top Layer: 0.8 mm
• Walls: 0.8 mm
• Extruder Temperature: 200 Degrees C
• Infill: 35%
• Speed: 70 mm/s
• Total Print Time: 125 minutes