Articulated Cobra + Pencil Holder
Articulated Cobra + Pencil Holder
3D
Published 2023-01-26T11:07:51+00:00
Anycubic x McGybeer
A collaboration that finally brings the Articulated Cobra to life!
Includes 2 versions of a Pencil Holder, with and without texture. The Cobra can be rolled both upwards and downwards!
Cobra and Pencil Holder are able to print in place with no supports.
Feel free to scale it up or down as much as you want (the limit is your printer).
Get the new Anycubic Kobra Neo here.
You can also support my work on Patreon
A good first layer is mandatory for the print to succeed. Be sure your printer is calibrated and you have good bed adhesion. I recommend a slow and thick first layer (8 mm/s and 0.3 mm).
Good layer cooling is also recommended, as it prevents curling and warping on overhangs.
For more tips, take a look at my printing tips.
| Date published | 26/01/2023 |
| Sin apoyo | YES |
one of the best things I've printed so far. also made for a great time lapse video https://youtu.be/QMQNDnwtHLY