Ball Scoop and Launcher
Ball Scoop and Launcher
3D
Published 2015-03-09T16:34:43+00:00
Summer is finally on its way... time to 3D Print yourself one of these awesome scoops!
With this scoop you can literally launch a small ball or tennis ball across long distances with a friend. Perfect for time in the park or on the beach!
Use it for your pet or print 2 and throw between a friend.
Object is printed in 2 parts, with very little support, object is then put together using a screw thread between the handle and the scoop body, holding them firly together, use super glue when attaching for extra security.
printed at 0.2mm layer height with 10% infill the scoop part of the product can be printed with a much higher percentage infill to give strength to the screw thread connecting the handle. this will not affect the print time too much because the scoop is also a very thin object.
| Date published | 09/03/2015 |
| ¿Cuándo tiempo lleva? | 540 - 580 minutos |
| Cantidad de filamento | 140 |
| Dimensiones | 370 x 85 x 160 |
| Complejidad | Fácil |