Blood Pools
$3.00 Blood Pools
3D
Published 2021-10-01T16:33:23+00:00
Gravelords
Season 1 - (3/4)
Blood Pools
Want something cool for your Gravesites? Annoyed that some terrain pieces fill the space and make it hard to fit your army of death? Why not add these flat pieces of terrain, your minions can stand on with no issue?
And how cool wouldn't it be to have your minions rise up again from a pool of blood?
Description
These blood pools are the portals that Lotharius and his Blood Reavers travel through. Opening and closing at his whim, the only restriction these blood pools have, is that they need to be connected to the Anima tunnel system, however, seeing as they are everywhere throughout the continent, this is no issue.
Details
These Blood Pools come in 3 different sizes to suit your tabletop needs!
Get 40% discount on this model by joining my Patreon!
You can also order physical copies of these on my Official Webshop!
3D Elements Printing guide
- Models validated and supported for 50um LH (0,05mm)
- If you cannot print them on mono printers I suggest to increase cure time (even with fast resins even to 2.6s)
- I suggest 5 burn in layers (you can also add 2 transition layers)
- Raft is thin to prevent raft separation and resin wasting + FEP degradating
- If you struggle with removing supports please use warm water to make them soft then remove it
- Cure your model after removing supports and be gentle since some of the parts are thin.
General info of codes:
Presupported = heavy presupports
L-Presupported = Lighter version of supports
LL-Presupported = they are most lightly supported, working good with well calibrated printers, also leaving minimum ammount of scars on the model.
Hollowed versions only in LYS files.
Please consider to use them instead STL, they create less suction forces that means it minimise chance for failed print!
Cheers.
Happy Printing,
- Daniel Krasuski
| Date published | 01/10/2021 |
| Precio | $3.00 |