Bone Bits - Spines And Ribs For Basing
$2.00 Bone Bits - Spines And Ribs For Basing
3D
Published 2023-09-21T08:28:17+00:00
11 pieces of spines and ribs for you next base and/or terrain element.
The ribs are quite thing, so I do not suggest scaling them down; but you can scale them up! While they're meant for resin printers, with a bit of supports you can print them quite large on an FDM machine to use as big terrain pieces, too.
Be careful when removing supports, as the ribs are quite delicate and can easily break. Piece 2 is very thin, but that makes it quite elastic, the spine elements should be fine :).
SOME pieces can be printed on an FDM as large terrain elements, but they were not designed to be. I made them for basing. That said, pieces 2, 3, 7 should print on an FDM quite fine without supports. Piece 9 may require some simple supports. The last photo with a minifigure gives you an example of a fresh FDM print.
Meant for resin printer;
_presupported_Package.stl contains all pieces merged into one. As usual, if the presupported file fails (which can happen), just take the unsupported pieces and create your own supports.
| Date published | 21/09/2023 |
| Precio | $2.00 |
| Sin apoyo | YES |