Bowknot
Scan The World
3,279
visitas
113
descargas
1
colección
0 comentarios
Cargando comentarios...
Bowknot
3D
Published 2016-05-04T12:03:50+00:00
4
0
Add to Collection
Descripción
Licencia
Detalles de impresión
This model looks simplistic, but is more challenging than it appears. I tried 5 different ways to print this to determine the best methods. The easiest way is to lay the model down and print using supports. The bowknot comes out nicely and the print time is 123 min. (45 mm) On the other hand, if you have a VERY stable printer you can print this model upright with NO supports at a very low speed (10 mm - 15 mm) Personally, I prefer the quality of the upright/ no support model but my print time was 860 min. for this method.
Información técnica
Date published | 04/05/2016 |
¿Cuándo tiempo lleva? | 123 - 860 minutos |
Cantidad de filamento | 20 grams - 25 grams |
Dimensiones | 52 mm x 35 mm 125 mm |
Tecnología | FDM |
Más información
Titulo | Bowknot |
Dimensión | x |
Adhesión | Given by the artist in 1996 |
Periodo | 1994 |
Medio | Bronze |
Crédito | Inscribed AP/ST '96 |
Artista | Skinkichi Tajiri |
Lugar | Middelheim Museum |
Archivos