Box / Organic waste bin “Montagne”
Sin soporte
Destacado
993
visitas
4
colecciones
2 comentarios
Cargando comentarios...
$4.00 Box / Organic waste bin “Montagne”
3D
23
2
Add to Collection
Descripción
Would you like to support my work? :)
Check out my full catalogue with exclusives, early access and commercial licences.
A storage box or medium sized organic waste bin for your kitchen.
The lid closes firmly for a minimal odor development. The inside is completely rounded off for easy cleaning. You can easily carry it in one hand to bring everything outdoors.
Included versions:
- Body_big: The Body with a outer size of 181 x 181 x 100 mm
- Body_small: The Body with a outer size of 168 x 168 x 59 mm
- Lid: The lid that fits both bodies
Scaling / size
- Upscaling (100% +): as big as you want
- Regular size (100%): Wall thickness of 2mm
- Downscaling (99% – 61%): works great
- Minimum size (60%): Wall thickness of 1.2mm
- Everything smaller than that is not tested
Detalles de impresión
- Required build volume: 180 x180 x100 mm
- Material usage: 200g body+ 45g lid
- Print time: 17h body + 4h lid
- Material: PLA
- Print direction: stls are rotated correctly, check images
- Support: none
- Nozzle size: 0,4 mm
- Line width: 0,4 mm
- Layer height 0,2 mm
- Outer walls: 3
- Infill: 15%
- Build plate adhesion type: none
- Watertight printing: If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), increase print temperature, check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.
- If you experience any problems, please feel free to contact me on twitter or Instagram
Información técnica
| Status | Approved |
| Precio | $4.00 |
| Sin apoyo | YES |
Más información
Archivos