Broadsword Superheavy Tank (Presupported)
$5.00 Broadsword Superheavy Tank (Presupported)
3D
Published 2024-05-22T09:03:14+00:00
This set of files contains everything you need to print the Broadsword superheavy tank. Note that this pack only contains the files needed to print the turreted version of the Broadsword.
The Broadsword and its sister vehicles are one step below the mighty Krevarian Landships - superheavy tanks with thick armor and bristling with weaponry.
The SHA.17 is primarily intended as a spearhead tank, capable of defeating any armored vehicle in its own weight class or lower. Most versions also carry a substantial secondary battery of light anti-armor, anti-infantry, and anti-aircraft weaponry, forming a strongpoint around which lighter armor can operate more effectively. Some versions of the Broadsword minimize the secondary battery in favor of additional supplies and communications gear to increase operational range. These variants are often used as command vehicles rather than in an assault role.
The weapons and modular hull parts have magnet holes in case you want to swap weapons after assembly. You’ll need 3mm (⅛”) x 1mm and 5mm (¼”) x 1mm rare earth magnets if you choose to take advantage of them.
-------------------------------------------------------------
This kit includes the parts needed to build a Broadsword Superheavy Tank with a variety of optional weapons.
There are two main gun options, three coaxial weapon types, and four options each for casemate and subturret weapons.
The side and upper/rear hulls are modular for easy swaps between loadouts, and the kit is compatible with the Pike and Palisade models.
The weapons have magnet holes in case you want to swap weapons after assembly. You’ll need 3mm (⅛”) x 1mm and 5mm (¼”) x 1mm rare earth magnets if you choose to take advantage of them.
This kit is presupported, but also includes unsupported STLs for those who want to print in FDM or would prefer to handle their own supports. If you do not require presupports, the original unsupported version of the Broadsword is still available and free, so get that one instead!
Supports for this model were provided by Yonathan Ho, who goes by Blunticulus on my discord (and elsewhere online).
Due to the large size of some parts and the arrangement of them for optimal printing, the presupported objects may not be compatible with some smaller printers. An example of one of the largest objects in this set is 111x105x84mm.
If you feel inclined to support my work (and get access to previews of upcoming work and voting rights to future model options), you may do so here:
patreon.com/nfeyma
myminifactory.com/users/natefeyma
| Date published | 22/05/2024 |
| Precio | $5.00 |
