BTT 70 v3.0 Screen case
2,245
visitas
120
descargas
0 comentarios
Cargando comentarios... 
BTT 70 v3.0 Screen case
3D
Published 2020-07-14T11:28:43+00:00
3
0
Add to Collection
Descripción
This is a case to put a 7" screen from BigTreeTech.
All the mounting holes need a brass insert in M3.
It need 2 M3x15 mm screw to fix the case on its legs and if possible 4 M3x4 mm screw to fix the screen in the case, if you have M3x8mm screw you can print the 4mm spacer.
It also need M5 or M4 screw with adapted t-nuts to fix the legs on a profile.
I made it to put on my CR10S that have 15cm legs.
I also displace the sd card reader with an sd extension to have it in the front and not on the side.
You have to break open the case of the sd extension to put it in the screen case.
Licencia
Información técnica
| Date published | 14/07/2020 |
Más información
Archivos