Butterfly Egg
1,400
visitas
6
colecciones
0 comentarios
Cargando comentarios...
$4.00 Butterfly Egg
3D
Published 2024-02-13T21:48:28+00:00
19
0
Add to Collection
Descripción
- The lock on the eggs has been re-done to be looser and easier to lock and unlock
The eggs have been made thinner to use less filament and has faster print times then the originals
The eggs have been resized from the original eggs (Dragon Scale & Crystal) and are now Larger to match 100% Egg to 100% dragon. Thus, if you scale the eggs to 60% they can fit 60% baby dragons in them!
Additionally the original Crystal Egg & Dragon Scale - Eggs have been updated with the new sizes and new locks as well!
And thanks to Jazzy, all the eggs have been aligned so the top and bottom have the same color when using tri or duel filaments
Detalles de impresión
FDM Settings
3 walls
10-25% infill
No supports
Raft or brim if you have adhesion issues
Resin Settings
No supports, flat on plate
50 um layer thickness
Light off delay can be helpful to let resin drip from links.
Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town
testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.
Información técnica
| Date published | 13/02/2024 |
| Precio | $4.00 |
| Tecnología | FDM |
| Sin apoyo | YES |
Más información
Archivos