Canon to 58mm lens macro adapter
5,649
visitas
410
descargas
1
colección
0 comentarios
Cargando comentarios...
Canon to 58mm lens macro adapter
3D
Published 2018-04-03T18:15:53+00:00
32
0
Add to Collection
Descripción
This is a macro extension tube that fits into your camera like a lens and then you put your wide angle lens (18-55) with a 58mm diameter on the part 2 of the adapter. You can achieve great macro results with this model. Don't forget to print it with several wall layers and a dark filament for the light not going inside.
If your lens' focus isn't manual this is the solution because you can focus with the thread, rotating the entire lens with part b of the adapter. And also you replace your 10mm, 20mm, and 30mm exxtension tubes with this variable one (10mm to 30mm)
Detalles de impresión
I printed it at 0,1mm layer height, two 0,4mm wall layers and a 30% infill. With a CR 10s
Información técnica
Date published | 03/04/2018 |
¿Cuándo tiempo lleva? | 360 - 480 minutos |
Cantidad de filamento | 32 grams |
Dimensiones | 68 mm x 68 mm x 35 mm |
Más información
Archivos