Captain's Shield
Captain's Shield
3D
Published 2020-05-22T11:55:31+00:00
Captain America's Shield, designed by separate printable circles, by color. I don't have multi-filament printer. I design a lock in each circle to keep the model anssembled. True White, Red and Blue for the Shield, if you like you can print the base with Grey, PLA filament.
You will find three dots in the internal side and three holes in the external side of each circle, that works as a lock.
Print, assembly and enjoy.
Printed at 60mm/s Print Speed. Consider just a feew lines of wall, I use 0.8, so that gives you between inner and out wall a total of 1.6mm. Four layers for Top and Buttom. 0.15 for height resolution, Infill at 16% with ZigZag Pattern. Support Zig Zag, 45°, 9% Support Density for the Base and Touching Buildplate as support placement.
-Cura Slicer
-Nozzle temp 205°
-0.4 Hardend Nozzle
-Bed Tempt 60°
-CMagnet Plate
| Date published | 22/05/2020 |
| ¿Cuándo tiempo lleva? | 420 - 421 minutos |
| Cantidad de filamento | 60 |
| Dimensiones | 120mmx120mmx25mm |