Corn holders
733
visitas
2
colecciones
0 comentarios
Cargando comentarios...
$3.00 Corn holders
3D
Published 2023-02-20T14:04:38+00:00
4
0
Add to Collection
Descripción
Would you like to support my work? :)
Check out my full catalogue with exclusives, early access and commercial licences.
A little helper for your next BBQ. Stop getting greasy fingers from eating delicious corn cobs. The texture provides a good grip.
Various hole sizes are provided for different toothpick diameters from 2,0 to 3,2 mm
You have two options:
- Choose your stl quite loose (diameter of the toothpick plus ca 0,4 mm depending on your printer’s accuracy) so the toothpicks get stuck in the cob when you remove the holder. This way you can then use the toothpicks as handle to throw the cob away without getting greasy fingers.
- Choose your stl quite tight so the toothpicks don’t get loose when removing the holder and change them from time to time.
Instructions:
- Choose your stl
- Print at least two of the holders
- Break or cut toothpicks in half
- Insert them
- Eat!
- Remove the holders and throw away the cub
Size without toothpick: 25 x 25 x 36 mm
Detalles de impresión
- Material usage: 10g per pair
- Print time: 1h per pair
- Material: PLA
- Print direction: stls are rotated correctly, check images
- Support: none
- Nozzle size: 0,4 mm
- Line width: 0,4 mm
- Layer height 0,2 mm
- Outer walls: 3
- Infill: 20%
- Build plate adhesion type: none
Información técnica
| Date published | 20/02/2023 |
| Precio | $3.00 |
| Sin apoyo | YES |
Más información
Archivos