Coup Perdu Clock
$12.00 Coup Perdu Clock
3D
Published 2022-11-02T11:44:48+00:00
Clock with a Coup Perdu escapement and battery powered rewind mechanism.
Coup Perdu is French for "lost beat" meaning the escapement moves one time for a complete back and forth cycle of the pendulum. This allows the second hand to move 60 times per minute with a 1/2 second pendulum.
The clock rewinds itself every few minutes using a small N20 motor and two AA batteries. Runtime estimates are around 6 months. The remaining electronics are a magnetic reed switch and a 2AA battery holder. All these parts are easy to find online.
The clock works as either a desktop or a wall mounted clock.
The dial is the largest component at 173x173mm. This allows the clock to be printed on a Prusa Mini or larger. The total print time is around 90 hours using just over 1kg of PLA. The clock shown in the images was printed using MatterHackers blue raspberry Quantum PLA.
A video of the clock in action can be seen at https://youtu.be/0dTbv5hlVlA
The detailed assembly guide can be downloaded before purchase from https://www.stevesclocks.com/sp8
A discussion forum for questions during the build or to show off your work is at https://www.stevesclocks.com/forum
23-Dec-2022 Update: Added an optional file motor_switch_cover_plastic.stl that has a larger opening to support a larger (and less fragile) plastic reed switch. They are often labeled as 3mm by 3mm by 14mm in size.
Most parts are printed using PLA with an 0.4mm nozzle, 0.2mm layer heights, 4 perimeters, 6 bottom layers, 7 top layers, 30% cubic infill, random seams, and 0.12mm elephant foot compensation. A few parts print better with 5 perimeters. Most parts print great with the Arachne slicing algorithm, except the gears that print better using the classic slicing mode. More details are in the assembly guide.
| Date published | 02/11/2022 |
| Precio | $12.00 |
| ¿Cuándo tiempo lleva? | 8000 - 8001 minutos |
| Cantidad de filamento | 1.1kg |
| Dimensiones | 175x175mm |
| Sin apoyo | YES |
Coup Perdu Clock