Cracked Earth 40mm Bases Topper
$2.95 Cracked Earth 40mm Bases Topper
3D
Published 2023-07-13T08:44:33+00:00
Twelve toppers with rocky terrain and 2 flat raised surfaces for miniatures to stand on. Fits the top of a 40mm x 40mm standard GW base.
Please note that the sizes of the bases mentioned in the heading match the GW base sizes they are designed for. These bases are slightly smaller, about 4mm less in diameter, to properly fit on GW bases. Also, GW bases have a 2mm difference in radius from the bottom edge to the top edge.
The bottom flat area of this base is 35.3mm x 35.3mm
If you wish to print them at the size in the heading they can be scaled by 1.12 in your slicing software.
Included Items:
Base Geometry:
Base01
Base02
Base03
Base04
Base05
Base06
Base07
Base08
Base09
Base10
Base11
Base12
PrintVariation1 SLA:
Each model pre-supported for SLA printing.
You can find more of my items at my website at www.tabletopminis.com
For updates, mini painting and printing you can also follow me on:
facebook: www.facebook.com/tabletopminis3dprints
instagram: www.instagram.com/tabletopminiatures
| Date published | 13/07/2023 |
| Precio | $2.95 |
Here is one of these base toppers. I have actually used it as the base for my mini, which is quite cool. To do this, I have scaled it up on the x and y by around 10%, and on the z by iirc 30%. This has made the actual base 40mm, and deep enough not to bend. I printed these with supports but in an ideal world I would have used a flexi plate and printed them flat.