Crawler C23 “Workhorse” 1/10 RC Body
$12.00 Crawler C23 “Workhorse” 1/10 RC Body
3D
Published 2022-08-22T11:15:07+00:00
The C23 “Workhorse” is not your typical farm truck. Want to conquer all types of terrains? This is it. Designed for use with massive 135mm tyres (for 1/10 scale) this truck has more belly and axle ground clearance than even fully kitted out crawlers.
Kitted out in this build was a SCX10 iii stretched and modified chassis recycled straight from the Crawler 4320 Dual Cab build we did here.
The Workhorse is also a multi-purpose vehicle that can be used to haul cargo on and off-road. It can also be configured in 4x4 or 6x6 configuration (maximum 120mm tyre height for use with stock TRX6 chassis/wheelbase), for scouting and towing purposes. In 4x4 configuration it is recommended to use a 420mm wheelbase. It is also recommended to use a tyre to tyre outermost width of 240mm for all wheelbases. Wider tyres or a wider track will allow the truck to be more stable at the cost of the turning circle.
Scale diagrams are shown for mock-up wheelbase setups.
The grille can be swapped out for an alternate version included with the files. The other version has straight horizontal bars going across.
The bonnet can be hard mounted onto the cab for extra rigidity, or it can also be hinge mounted to the bumper as the included magnet mount can hold the bonnet shut. Similarly the doors can also be hinge mounted with the included “alt.” versions for extra realism. The mirrors too are designed to pivot.
LEDs light buckets are included so 5mm and 3mm LEDs can be added to the headlights and fender lights. Body mounting holes are designed for easier mounting without having to do measurements.
The radiator and interior’s dashboard along with the steering wheel are now included and can be bolted on easily without any modifications. 2.2 mock wheel hubs are also included just to add even more realism.
A pair of body mounts and bumper posts are also included. However it most likely needs to be modified to fit different builds.
Bonus battery box (maximum battery size 168Lx52Wx55H) shown in the picture is also included as a thank you!
Assembly instructions:
View the link below to download the assembly instructions
https://www.aheadrc.com/manual
Designed to be printer friendly, the parts come in a variety of included options.
Cab:
Cab uncut (cab and roof are a 1 piece print. Requires a printer that can print a minimum of 155x210x185mm)
Cab cut (splits cab and roof into 2 piece print. Requires a printer that can print a minimum of 155x210x165mm)
Doors:
Mock hinge (lookalike hinges can be mounted, but door cannot be opened)
Hinge alt. Version (flat sections on mock hinge to allow mounting of real hinges. Please use the appropriate “alt. Version” doors for use with “alt. Version” hinges.
Grille:
Big mesh grille (grille is opened and shows only the grille mesh)
Grille alt. Version (grille with bars going across)
Bumper:
Bumper (wide rectangular bars)
Bumper alt. Version (Rectangular bars with angled lowers for better clearance)
Some files will need to be printed multiple times, this includes the following:
Door handle x2
Big orange (fender lights) x2
Small orange (fender lights) x4
Headlight lens x2
Mock cab lights x5
Windshield hinge x2
Cab side bolts x8
Handlebar x2
Non threaded wipers x2
Bumper lens x2
Mirror x2
Mirror mount lower x2
DXF files can be found here: https://www.aheadrc.com/dxf-files
*It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.*
Should you need any help, please do not hesitate to contact us!
FDM printing:
Requires a printer that can print a minimum volume of: 155x245x165mm.
PLA+ filament
0.3mm layer heights
10% infill density
Supports are necessary
| Date published | 22/08/2022 |
| Precio | $12.00 |
| Dimensiones | 291*240*218mm (All parts assembled) |