Creality Ender-4 Improve Ergonomics of Display Module, rotate 30 degrees
4,088
visitas
147
descargas
1
colección
0 comentarios
Cargando comentarios...
Creality Ender-4 Improve Ergonomics of Display Module, rotate 30 degrees
3D
Published 2019-04-17T11:20:14+00:00
27
0
Add to Collection
Descripción
Issue: using a vertical Display Module is not convenient by design unless you printer is sitting on top of a full size table.
Solution: rotate the Display Module by 30 degrees to make it more user friendly.
Simple print, no support. Threads in the holders for the Display Module are embedded, but still require M5 bolt to be forcefully screwed in and out to make threads distinct and sharp before mounting the Module.
BoQ:
- 2 x Bottom Holder (the right one may be mirrored as it is shown at my pictures - right in the slicer)
- 1 x Top Corner Holder
- 3 x M5x10 bolt http://got.by/3z1myw (100pcs) or http://got.by/3z1n4q (50pcs) or http://got.by/3z1n90 (30pcs)
- 3 x M5 T-nut: http://got.by/3z1q51 (50 or 100pcs)
- 3 x M5x8 bolt (stock)
Mounting hit: since mounting holes are covered by the Display Module you would need to:
- attach holders to the Display Module
- lean it to the frame and mark holders' positions on the frame by a pen or marker
- unscrew the Module, attach holders to the frame according to marks
- attach the Display Module
Enjoy!
If you like my design, please, consider making a small "cup of coffee" donation using PayPal
Detalles de impresión
- PLA, ABS
- Resoluiton 0.2mm
- infill 25%-50% Cyroid
Información técnica
Date published | 17/04/2019 |
Tecnología | FDM |
Sin apoyo | YES |
Más información
Archivos