Customizable Bracelet - Choose your own colours, print then link together and wear!.
Customizable Bracelet - Choose your own colours, print then link together and wear!.
3D
Published 2017-03-20T12:29:47+00:00
This customizable bracelet has two parts... a block and a link. Print each component in the number and colour or choice to create a unique 3D printed bracelet.
Links are added and removed by rotating one component 90° from the other then sliding the link to the centre of the block and inserting/extracting it.
Build up your bracelet by printing blocks and links in the colours and numbers of choice. Easy to link together, easy to put on and remove, but it won't come off until you want it to as it requires a link/block to rotate a full 90° to link/unlink.
A simple but effective way to create a unique and colourful 3D printed bracelet. Glow in the dark filament is also very effective.
Both parts print really well on a Replicator 2 with a Raft, 4 shells and 35% infill. No support required. The .stl's are for single pieces. Copy and paste as many as you need to make the required length (13 to 15 blocks should cover most wrist sizes).
| Date published | 20/03/2017 |
| Tecnología | FDM |