Death Wish Spirit
1,621
visitas
3
colecciones
0 comentarios
Cargando comentarios...
$2.95 Death Wish Spirit
3D
Published 2023-08-07T19:46:23+00:00
42
0
Add to Collection
Descripción
A spooky, deathly variation of the wish spirit! She prints-in-place, articulates, and prints with no supports. She can pose with her wings in the air!
This model is for PERSONAL USE ONLY! commercial license available on my Patreon.
Detalles de impresión
A few things to consider before printing!
- A clean leveled bed is a must!
- If slicing in Cura it is best printed in the orientation that its in with the z seam set to back left. this way the z seam will avoid overhangs!
- Can be scaled! tested from 60% to 140%. at 60% the ball joints on the wings can be sticky and will need to be worked loose gently!
- There are clips on the side of the body for the wings to rest on. If you feel resistance while pushing past the clips press the wing into the body while pushing past it as to not apply pressure to the clip
- The wings can be kept straight or bent using a heat source
Información técnica
| Date published | 07/08/2023 |
| Precio | $2.95 |
| Sin apoyo | YES |
Más información
Archivos
60% in Eryone Blue, Purple, and Black tricolor