"demibot" analog camera mount HIGHvisibility
"demibot" analog camera mount HIGHvisibility
3D
Published 2023-01-16T15:46:28+00:00
See the difference between stock camera mount vs my camera mount.
Initially I saw the stock camera mount and figured it would be sufficient but once I flew I realized that mount is unacceptable. I had so much frame in view. This mount takes advantage of the large opening at the top to get your camera up closer to the top corners of the frame. This is where the impact happens but also the closer the lens is to this point the less of the frame you will see. I usually use a caddix ant nano so this caddix ratel seems huge but the mount fits it perfect and it rides the standoffs all the way up or down depending where you set the camera. I didn't leave enough wiggle room on the capcitor so if it fits in my build it should fit in yours especially if you were smart and left some length on the cap legs. This mount is very rigid and adds just enough protection for your camera and frame without adding more weight to a heavy frame.
| Date published | 16/01/2023 |