This is a premium version of my 'Dodeca-box' iris box which features an easy opening twist collar and more decorative features. The box is 80mm tall, 80mm in diameter and is opened by twisting the collar anticlockwise. The container opening is 62mm in diameter and the iris opens almost wider than the container itself! No support material is required for this design.
I recommend printing my free design 'Dodeca-box V2' first to make sure you can make this design before you buy.
Other than the printed parts, this design requires M2x6 countersunk/flathead screws (60 in total) to assemble such as these (the same screws my other designs use). Larger or smaller screws may be used if you scale the model appropriately e.g. M3x8 screws at 150% part scale. Note: it's a lot cheaper per screw if you buy in bulk from a specialist supplier.
There are two versions of the container, the standard sized container and the shortened container which brings the overall height down to 48mm. The pattern on the yellow container was formed using the velocity painting technique on the standard container and there are many excellent guides online on how to do this. The triangular pattern was designed by rawpixel.com / Freepik
There are three types of door included for the box:
The simple 'door' is completely flat and is used on the silver/gold/black box.
The decorative door 'top door mech' has an embossed embellishment on top of the doors. There is also a multimaterial version of this door, denoted with 'mm' in the file name, which is shown on the gold/silver/yellow example. These can be made with a single nozzle printer using the multi-pass printing technique, an excellent tutorial on how to do this was made by Devin Montes.
And lastly there are the 'hole' parts which have the same pattern as the 'mech' parts, but the panels are cut all the way through the doors creating the framework type appearance as shown on the black/white example.
There are also two types of opening collar, 'collar 1' has six dimples for gripping the collar (as used on the black/white box) while 'collar 2' has twelve dimples (as used on the other containers).
All the examples were printed with Rigid Ink PLA (except for the yellow container which is PETG) filament: affiliate link.
I recommend printing my free design 'Dodeca-box V2' to make sure you can make this design before you buy.
Before printing off all the parts you should make sure the screw joints work correctly with your print settings. Print one 'door top' and one 'door base' parts. Check that your screws fit tightly in the holes in 'door top' but are free to rotate in the 'door base' holes and the head is flush with the bottom surface. You may need to use hole XY compensation (Ideamaker is a free slicer which does this) to get a good fit.
Assembly Instructions (also see pictures)
To make one box you will need to print: 1x 'container' or 'short container', 1x 'collar 1' or 'collar 2', 6x 'link 1', 6x 'link 2', 12x 'door base' of any type and 12x 'door top' of any type. No support material is required for these parts. You will also need 60 M2x6 countersunk/flathead screws.
Firstly screw the non-pointed end of the longer links (link 1) to the collar. It is important to get these the right way around otherwise the mechanism will not work. Then place the collar assembly onto the container. Now you can screw the smaller end of the smaller links (link 2) to the holes in the container, again making sure they are the correct way around. This should hold the collar assembly onto the container securely, but it should still be free to rotate.
Next take all the 'door' parts and begin assembling them into the iris with the screws. It is easier to assemble it in the closed iris position and try to keep the screws straight to make the assembled top neat. Don't overtighten the screws otherwise it will be difficult to open the box. I generally tighten them all the way and then untighten them half a turn. This iris mechanism should now open and close fully.
Now take the container assembly, flip it upside down and place it onto the base of the iris mechanism. Screw the larger end of the small links (link 2) to the inner holes on the 'base' doors. Make sure the six links are distibuted evenly around the mechanism, one every other base door. Now take the longer links and screw them to the outer holes on the same doors which the other links (link 2) are attached to.
The box is now fully assembled! The box should close by twisting the collar clockwise (it may be a bit stiff at first).
If you have any problems with this design, let me know and I'll try to help out ASAP.