Dracula’s Slumber
$15.00 Dracula’s Slumber
3D
Published 2023-10-06T13:17:04+00:00
Why pay for this single file when you have over one thousand more for a lot less? That’s right. STLFLIX is a multi-theme ever-growing library of STL files. Your One-Stop-Shop for Premium 3D-Printing models. Get started with the Ultimate STL platform!
Dracula’s Slumber
Follow these instructions along with the assembly video: CLICK HER
Beginning with the Spring, attach it to Axle, then fit it on the designed place inside the Coffin.
Attach Ratchet on to the other side of the Axle and fit it on the designed place inside the Coffin.
By the side of the hinge of the coffin, fit Ratchet Lock in the correct position inside Coffin then place Cover on top of the Coffin.
Fit the Ratchet Key on the Cover according to the video and secure it inside the Coffin.
Place the Lining inside the Coffin minding the designated spot of the mechanism, then attach the Body of our dear vampire count on the Axle, and your inhabited coffin is ready to scare some people!
Make sure you lock Dracula in place when the coffin’s lid is slightly closed.
Happy Halloween
This STL file is recommended for FDM Printers!
3D Printing Time: 02 Days 11 Minutes
Approximately Height : 18,5 cm
Even in a great coffin, Dracula struggles to sleep. Maybe he’s feeling a bit jumpy?
Our vampire needs some assembly.
COPYRIGHT & SELLING RIGHTS
This STL file is copyrighted by STLFLIX©, the Ultimate STL Subscription. This means you can print it for yourself, but you DO NOT have the right to sell it.
To acquire copyright & selling rights, you must subscribe to our Commercial License. By doing so, you will also get immediate access to over 500 STL files, unlimited downloads, and marketing content for every single file.
Go commercial and skyrocket your own store with STLFLIX!
USEFUL LINKS
Get to know us a little better!
Website | Instagram | TikTok | Twitter
What are you waiting for? Join thousands of other makers from all around the world.
HAPPY PRINTING!
Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
Recommended Initial Layer Height: 0.16 mm
Recommended Layer Height: 0.16 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Date published | 06/10/2023 |
| Precio | $15.00 |