Dragon
$10.00 Dragon
3D
Published 2020-07-19T14:54:18+00:00
A very high detailed model I made based off a dragon model I made some years ago.
The files are very large and will likely require a beefy computer to slice.
You will definitely require support material to print this, but how much will depend on the printer/type of print you're doing.
Download includes 2 files:-
STL: 297MB
3MF: 73MB
Credit to twitter users @Dsk001_3D and @midnightsmith for the pictures of the printed models - Dsk's is the red filament, and midnightsmiths is the grey resin one)
At 100% scale, it's about 196mm long. The bigger you print it, the more detail you will retain, though surprisingly, even scaled down resin prints have managed to keep a lot of detail as well :)
You will definitely require support material to print this, but how much will depend on the printer/type of print you're doing.
Apparently some users have reported that Cura seems to report the model as being non-manifold, but other slicers seem to have no issue with it. Both files were confirmed as manifold using 3d Builder.
| Date published | 19/07/2020 |
| Precio | $10.00 |
| Dimensiones | 93.5x196x114 |