AEDWRF11 - Clan Nogg’s Great Table
$4.00 AEDWRF11 - Clan Nogg’s Great Table
3D
Published 2021-04-14T16:22:11+00:00
This set is included in our 6 month loyalty pack for Tribers pledging $15 or more.
This expansion of our popular Dwarven line of terrain was done mostly by Aether fan, patron, and remixing revolutionary, Marc Weatherhogg. Marc took the initiative on this set and came up with the ideas and hard work, test printing, and revisions needed to make it happen! Inside you will find 5 3d printable .STL files for your tabletop games.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 14/04/2021 |
| Precio | $4.00 |