Earth Logo / Pin / Keychain Multicolor Print
Earth Logo / Pin / Keychain Multicolor Print
3D
Published 2020-08-21T20:50:14+00:00
Hello there. I've designed an Earth model which is similar to Kurzgesagt's illustration. You can go and check their amazing videos with this link : https://www.youtube.com/channel/UCsXVk37bltHxD1rDPwtNM8Q
This model can be printed multicolor with a single nozzle.
There are 3 versions of the model: Logo, magnet pin for 10⌀x2mm magnets and a keychain.
!!For the pin only: You have to glue the magnet in the hole and have a spare one in order to use the magnets as a pin.
Please read the printing details.
Instructions for Multicolor
1- Print 3mm in height with blue color filament then stop.
2- Change the filament color to the green and print 1mm in height then stop.
3- Change the filament color to the white and print the last 1 mm of the model.
This model was printed on Prusa I3MK3S with Colorfabb PLA/PHA on 0.2mm layer heights.
Support material is not necessary.
| Date published | 21/08/2020 |
| Sin apoyo | YES |