El Domo Wind Tunnel
El Domo Wind Tunnel
3D
Published 2021-09-02T18:57:18+00:00
A result of a training program at El Domo Product Design Agency.
This Wind Tunnel is perfect for schools and any experimental person who likes to learn about aerodynamics.
The fans used are SUNOS_SP101A.
You can add smoke through the fans, but it for more control you need to direct the smoke using a tube into the model section, which requires making a hole. As this depends on the used tube and chosen position, we deliver the design without the hole. You can add it before or after the 3D-Printing.
To mount a model on the top cover or model base, use BBQ 3mm wooden/bamboo sticks.
The easies way to control the speed in 4 stages, add a switch to each fan, just a simple switch on one cable of each fan. This will allow you to control how many fans will be on of off.
Only the Airfoil file requires support. All other can be made with no support.
We used Ender 5 Plus. You really need this size.
- It is under the CC BY 4.0 license.
- For more information about this project and to access the STEP and 3D PDF files, watch this video:
- The project page is:
http://www.el-domo.com/project-el-domo-wind-tunnel/
- Please share it with schools around you and help them to build and use it.
Only the Airfoil file requires support. All other can be made with no support.
We used Ender 5 Plus. You really need this size.
| Date published | 02/09/2021 |
| Sin apoyo | YES |