Ender3 Pro Slide Powersupply support
1,647
visitas
79
descargas
2
colecciones
0 comentarios
Cargando comentarios...
Ender3 Pro Slide Powersupply support
3D
Published 2020-03-22T07:10:24+00:00
4
0
Add to Collection
Descripción
For Ender3 Pro there aren't many optios to allocate the powersupply when add the second Z Axis rod. That mod force to move the original position of the power supply.
I look for the easiest, simple way and if possible don't use tools to install.
Hope this version works for you, just drop the PS inside and slide in the 40x40 extruded support.
Licencia
Detalles de impresión
Printed at 60mm/s. Consider just a feew lines of wall, I use 0.8, so that gives you between inner and out wall a total of 1.6mm. Four layers for Top and Buttom. Infill at 30% with ZigZag Pattern. Used Zig Zag, 45°, 20% Density for the Support option.
-Cura Slicer
-PLA
-Nozzle temp 210°
-0.4 Hardend Nozzle
-Bed Tempt 65°
-CMagnet Plate
Información técnica
Date published | 22/03/2020 |
¿Cuándo tiempo lleva? | 316 - 322 minutos |
Cantidad de filamento | 54gm |
Dimensiones | 61mm x 58mm x 101mm |
Más información
Archivos